2006P 1DER 021 030
2006P-1DER-021WS 180°
DESCRIPTION: Light step deviation is seen under columns 5, 6, 7 and 8
NOTE: With both obverse and reverse trail dies, this is a major die.
DIE MAKERS: Stage “B”, obverse is MDS – die scratch through the 0 and 6 of the date. The obverse is a trail die
Reverse is MDS – small die dot in the N of UNITED.
2006P-1DER-022WS 180°
DESCRIPTION: Moderate step deviation is seen under columns 5, 6, 7 and 8, with emphasis on the left side. This is coupled with an obverse trail die, 2006P-1DEO-010T.
NOTE: With both obverse and reverse dies affected with trails, this is considered a major.
DIE MARKERS: Stage “C”, obverse is LMDS – light trail lines from the letters in LIBERTY and the TR of TRUST.
Reverse is LMDS – none noted.
2006P-1DER-023WS 180°
DESCRIPTION: Moderate fluting line extension, into the stylobate, under columns 2 and 3. Moderate step deviation is seen under columns 5, 6, 7 and 8, with emphasis on the left side.
DIE MARKERS: Stage “B”, obverse is MDS – none observed.
Reverse is MDS – Die crack from the field, through the C of CENT and into the rim. Die chip in column 1.
2006P-1DER-024WS 180°
DESCRIPTION: Moderate fluting line extension is seen under columns 2 and 3. Moderate step deviation is seen under columns 5, 6, 7 and 8, with emphasis on the left side.
DIE MARKERS: Stage “B”, obverse is MDS – none observed.
Reverse is MDS – die crack, in the cornice, above column 4. Die dot under the diagonal of the N and in the O of ONE.
2006P-1DER-025WS 180°
DESCRIPTION: Moderate fluting line extension is seen under column 2 and 3. Light to moderate step deviation is seen under columns 5, 6, 7 and 8, with emphasis on the left side.
DIE MAKERS: Stage “B”, obverse is MDS – none noted.
Reverse is MDS – none noted.
2006P-1DER-026WS 180°
DESCRIPTION: Light step deviation is seen under columns 5, 6, 7 and 8, with emphasis on the left side.
DIE MARKERS: Stage “B”, obverse is MDS – die gouge under the second 0 of the date.
Reverse is MDS – die crack, in the cornice, over column 3.
2006P-1DER-027T 330°
DESCRIPTION: Light trail lines are seen from the tops of the letters TES in STATES, OF and the A of AMERICA, The offset direction is 300º. There is also some minor distortion on the letter tops of EPU. This die was found by Carol LaDue of California.
DIE MARKERS: Stage “B”, obverse is MDS – none noted
Reverse is MDS – die gouge in the A of STATES.
Stage “C”, obverse is MDS – large die crack across the top of Lincoln’s head.
Reverse is MDS – die gouge in the A of STATES remains.
2006P-1DER-028WS 180°
DESCRIPTION: Moderate to strong step deviation is seen under columns 5, 6, 7 and 8, with emphasis on the left side.
DIE MARKERS: Stage “B”, obverse is MDS – die scratch to the left of VDB
Reverse is MDS – die dot in bay 2.
2006P-1DER-029WS 180°
DESCRIPTION: Moderate step deviation is seen under columns 5, 6, 7 and 8.
DIE MARKERS: Stage “C”, obverse is LDS – none observed
Reverse is LDS – die crack in the top of column 1. Die crack in the cornice above bay 3.
2006P-1DER-030WS 180°
DESCRIPTION: Light step deviation under columns 5, 6, 7 and 8, with emphasis on the left side. This die also has a working hub doubling and is seen as indents into the stairs below the right side columns. The designator for this is 2006P-1WHDER-001.
The obverse die also has a minor doubled die, seen as extra thickness on the TY of LIBERTY with notching on the lower right termini of those letters. This die was found by Jeremy Gardner of Kentucky.
DIE MARKERS: Stage “B”, obverse is MDS – a doubled die with extra thickness on the TY of LIBERTY and notching on the lower right of those letters.
Reverse is MDS – die gouge under the right side of the horizontal bar of the second T in STATES.