1997P – 1DER; 001 – 010 Files

1997P-1DER-001WS                                   180°

DESCRIPTION: Moderate step deviation under columns 5 through 8.

Stage “C”                                                                        Stage “D”

DIE MARKERS: Stage “C”, obverse is LDS – none noted

Reverse is LDS – strong die scrapes through the left base and the O and N of ONE. Diagonal die scratches are seen in bays # 4, 5 and 6.

Stage “D”, obverse is VLDS – none noted

Reverse is LDS – die crack with die chip in column # 2. Die gouges in the O and N of ONE. Die scrapes have diminished in strength.

 

1997P-1DER-002WS                                 200°

DESCRIPTION: Strong fluting line extension, into the stylobate under columns 2 and 3. Strong to moderate step deviation is seen under columns 5 through 8 with an offset direction of 190 degrees.

DIE MARKERS: Stage “B”, obverse is MDS – small die gouges around the B of LIBERTY.

Reverse is MDS – large die chip on the left edge of the cornice.

 

1997P-1DER-003WS                                  180°

DESCRIPTION: Moderate fluting line extension, into the stylobate, under column 2 and 3, with strong step deviation under columns 4 through 8.

DIE MARKERS: Stage “C”, obverse is LDS – none observed

Reverse is LDS – die crack the whole length of column 2. Die gouge on the lower bar of the E in UNITED.

 

1997P-1DER-004WS                                  180°

DESCRIPTION: Light step deviation is seen under columns 5, 6 and 7.

DIE MARKERS: Stage “C”, obverse is LDS – none observed

Reverse is LDS – small die gouge just left of left Post. Small die gouge is seen to the lower right of E in CENT.

 

1997P-1DER-005WS                                 180°

DESCRIPTION: Moderate to strong step deviation under columns 4 through 8.

DIE MARKERS: Stage “D”, obverse is VLDS – none noted

Reverse is VLDS – die clash in bay 4. Die chip in the N of ONE. Die scratches from the left stylobate edge towards the U of UNITED. Die scratch over the O of ONE.

 

1997P-1DER-006WS                                  180°

DESCRIPTION: Moderate step deviation is seen under columns 5 through 8.

DIE MARKERS: Stage “C”, obverse is LDS – two die scratches from WE to the R of TRUST.

Reverse is LDS – small die gouge between the U and N of UNITED.

 

1997P-1DER-007WS                                  180°

DESCRIPTION: Light step deviation is seen under columns 5, 6 and 7.

DIE MARKERS: Stage “C”, obverse is LDS – none observed

Reverse is LDS – die gouge under the left side of the T in CENT. Three die gouges around the CA of AMERICA.

 

1997P-1DER-008WS                                 190°

DESCRIPTION: Fluting line extension, into the stylobate, under columns 2 and 3. Moderate steps deviation under columns 5, 6 and 7 with an offset direction of 190 degrees.

DIE MARKERS: Stage “B”, obverse is MDS – die scratches under WE TRUST.

Reverse is MDS – die clash bay 4. Light die scratches in bay # 5 and 6.

 

1997P-1DER-009WS                                 190°

DESCRIPTION: Light step deviation is seen under columns 5, 6 and 7.

DIE MARKERS: Stage “C”, obverse is LDS – die gouge in the field below IN.

Reverse is LDS – die gouges under the U, N and T of UNITED. Die gouge next to the last A in AMERICA.

 

1997P-1DER-010WS                                 190°

DESCRIPTION: Strong fluting line extension, into the stylobate, under column 2 with moderate fluting line under column 3. Moderate step deviation is seen under columns 5, 6 and 7.

DIE MARKERS: Stage “B”, obverse is MDS – small die gouge in the lower part of the R in LIBERTY. Small die gouge is seen next to IN.

Reverse is MDS – small die gouges are seen in the left part of the M in AMERICA and between the A and M of AMERICA.

Next Page